Description
Powder-coated aluminum “HITCH MOUNT”. The end that fits into the receiver is 15″ long and is a 2″x2″ square (outside measurement). The hole for the pin is 5/8″ in diameter. This is primarily used for RV camping or tailgating in a parking lot! A hitch pin is not provided.
- The 3″ GS (Ground Sleeve) is only used if you put the mast into the ground for the 20′ and 25′ masts. OPTIONAL
- The 2.5″ GS (Ground Sleeve) is only used for the 15′ mast to mount into the ground. OPTIONAL
- The 2.5″ RS (Reducer Sleeve) must be used with all mounts which are 3″. OPTIONAL
Powder-coated aluminum “WHEEL MOUNT”. This is primarily used for RVs under the tire. You simply park one of your tires on it and set the brake, then drop your flagpole in the hole! The wheel stand plate is 30″ long x 8″ wide.
- The 3″ GS (Ground Sleeve) is only used if you put the mast into the ground for the 20′ and 25′ masts. OPTIONAL
- The 2.5″ GS (Ground Sleeve) is only used for the 15′ mast to mount into the ground. OPTIONAL
- The 2.5″ RS (Reducer Sleeve) must be used with all mounts which are 3″. OPTIONAL
Don’t forget the Reducer Sleeve for Mounts if your pole is a 15′ (2.5″ base). OPTIONAL
Anodized aluminum “MAST TOPPER” allows mounting antennas with a 3/8×24 stud mount such as our MPAS 2.0, MPAS Lite, TDL, RXL Pro, or other similarly mounted antennas, or antennas that use U bolts or clamps. See the Porta Mast user guide for antenna weight and wind loading limits.