Description
Telescoping Mast 15′,20’or 25′
The SKP PORTA MAST – HF Beams are Not Recommended!
Small UHF/VHF Beams With Short Booms are OK.
Please read wind loading on PAGE 11 of the USER GUIDE!
The SKP PORTA-MAST is a heavy-duty telescoping mast made with industrial strength (6005T6) anodized aluminum. It is designed for semi-permanent installation or temporary installation with no guy wires required. The interlocking sleeve mechanisms between each section make it easy to raise and lower the telescoping mast. The mast is strong enough to mount several antenna configurations at the same time, such as a wire HF antenna plus either a VHF/UHF Yagi and a rotor or a high-gain VHF/UHF vertical (see specifications for details).
The SKP PORTA-MAST is available in three lengths: 25, 20, and 15 feet. The 25 and 20-foot masts are made from 12 gauge aluminum, have four sections, and have a base diameter of 3 inches. The 15-foot mast is made from 14 gauge aluminum, has three sections, and a base diameter of 2 1⁄2 inches. The top section of all three masts has a diameter of 1 3⁄4 inches.
- The 3″ sleeve is only used if you put the mast into the ground for the 20′ and 25′ masts. OPTIONAL
- The 2.5″ sleeve is only used for the 15′ mast. It is used for any of the mounts to insert into the 3″ sleeve that comes with the mounts! OPTIONAL
- 2.5″ Mounting Sleeve
- 3″ Mounting Sleeve
There are a variety of SKP PORTA-MOUNT options for the SKP PORTA-MAST. Semi-permanent installation is accomplished using the supplied in-ground sleeve or with an optional Deck or Side Mount, for mounting to a structure. Temporary installation requires either the optional Wheel Stand or Hitch Mount.
RELATED PRODUCTS: PORTA MOUNTS